现货NE-500注射泵,NE-500,OEM注射泵NE-500,OEM注射泵附件

NE-500
请致电:010-67529703
new era pump systems, inc.

OEM注射泵NE-500


OEM Syringe Pump
NE-500
OEM Syringe Pump with Stall Detection
NE-501
High Pressure OEM Syringe Pump
NE-510
High Pressure OEM Syringe Pump with Stall Detection
NE-511 

Double OEM Syringe Pump
NE-4500
Double OEM Syringe Pump with Stall Detection
NE-4501 


·Computer controllable: networkable up to 100 pumps

Stand-alone operation: pre-program the pump with a dispensing program,

then operate the pump from an attached Foot Switch, button, or I/O controller

·Add the OEM Starter Kit to run as a fully functional, stand-alone pump.

Designed for OEM applications, this pump has the same mechanisms and

electronics as the NE-1000 aside from the front panel controls.

·Operates from a computer or a foot switch

·Infusion and withdrawal

·Set a single pumping rate and/or dispensing volume

·Program up to 41 pumping phases that change pumping rates, set dispensing volumes, insert pauses, control and respond to external signals,

sound the buzzer

·Network, control, and monitor up to 100 pumps with one computer

·Motor stall detection available in NE-501 MODEL

·Dispensing accuracy of ± 1% 

For Custom Designed OEM Syringe Pumps please call or e-mail for a quote. 

Custom Chassis, Firmware and Mechanical Design. You want it, we'll make it, no matter how
simple or complex
. When others say it can't be
done, we say of course 
it can be done. The
limits are endless to what we can create for you.
We here at New Era have been designing
pumps for over ten years for all types of OEM
applications.
 

<br class="Apple-interchange-newline"><div id="inner-editor"></div>
OEM注射泵附件

OEM Starter & Net Kits 
Model: OEM-STARTER 


·Allows user to interactively communicate to the
pump with a computer
·Includes: power supply, Pump-to-PC network
cable and user manual
 

Model: OEM-NET 

Power supply and secondary cable only. For use when networking
two or more OEM NE-500 syringe pumps together. Must use the
secondary cable in order to complete this application
 .

Foot Switch 

Model: ADPT-FOOTSW-2 
·Start, stop, or send a signal to a pumping program
·Attach to any of the NE-1000 family pumps to allow remote operation
·Utilizes the TTL logic port on the pump
·Quick and simple setup