联系人:李经理
联系电话:010-67529703
品牌:new era syringe pump

 

美国NEW ERA Syringe Pump 如下系列注射泵及其配件现货促销

一、注射泵

NE-3000

美国ERA Syringe Pump 注射泵,NE-9000 Peristaltic Dispensing Pump,NE-300 Just Infusion Single Syringe Pump,NE-1000 Single Syringe Pump,NE-4000 Double Syringe Pump,NE-1002X Microfluidics Single Syringe Pump,Continuous NE-1000X Next Generation Continuous Infusion Syringe Pump System,NE-1000,NE-500,NE-4000,NE-1600,NE-1800,NE-1002X,NE-4500,NE-4002X,NE-1200,Dual-NE-1000


NE-9000蠕动注射泵

NE-300 单向注射泵


说明:
 
有大小不同的注射器可达60ml
它将会连续工作直到你停止
在抽取式时输液率会有所改变
通电之前记住先设定
电源故障模式允许重新设定后继续抽取
注射器清洗模式
可显示配液的总体积单位:ml或L
60mL注射器的大抽率为1500mL/hr
j确重现流速
可选流速单位: mL/hr, L/hr, mL/min, L/min
图中的注射器只用作演示
不能回抽,体积目标,或者有微机连接

NE-1000 现货促销

 

微量注射泵产品简介: New Era系列注射器微量注射泵可用于:生物医学、动物、制药、化学、物理等科学实验领域,同时具有注射和回抽功能,可控制流速,可通过程序控制注射流量。相比较其它同类产品,New Era泵提供了更强的功能,然而价格确比其它品牌要低。这让New Era泵嬴得了大量的客户。客户向其它的同事这种微量注射泵。对于需要双泵的用户而言,New Era系统的势是巨大的。它以不高于其它品牌双通道泵的价格,提供两台单通道泵。这两台泵可以单控制,从事不同的实验,也可以互联,运行相同的参数或程序。功能和实用性均远超其它厂家的双通道泵。New Era微量注射泵可兼容市场上绝大部分的注射器。

 

主要特性: 

  1. 可单机操作也可电脑控制 (RS-232插头) 
  2. 可注射也可回抽 (双向) 
  3. 可用1~60cc注射器 
  4. 可选择注射流量及流速控制程序,有41种选择 
  5. 可将多个泵连接组合成一个系统 (双筒), 大可达100泵; 
  6. 单筒NE-1000、双筒NE-4000, 6筒NE-1600、8筒NE-1800整机选择. 
  7. 注射速率pumping rate:

NE-1000: 0.73 ml/小时~2100ml/小时

NE-4000: 0.73 ml/小时~2100ml/小时

NE-1600: 0.568 ml/小时~1337ml/小时

NE-1800: 0.568 ml/小时~380 ml/小时

 

技术参数:

 

注射器尺寸    1-60ml,or 0.5-5l微量注射器

注射器数目     1,6,8 依据泵的型号变化

驱动方式     步进马达,1/8 to 1/2步进方式

转轴大步进数  400/s

马达步进距离   0.850m(1/2step)

马达/转轴齿数    15/28

速度(max/min) 5.1cm/min 0.0042cm/hr

泵流量       大:1699mL/hr,60ml注射器

小:0.73L/hr,1ml注射器

大推力      35lb 小流速时

18lb 大流速时

程序数       41

电源        220V,50-60Hz

尺寸       22.9×14.6×11.4 cm

重量       1.

 

NE-4000 双通道注射泵

 


NE-4000 双通道注射泵
说明:

  • 两支注射器,每只60 cc*,可以有不同的规格
  • 流速:1.459 µL/hr(1cc注射泵)~7635 ml/hr(60cc注射泵)
  • 易于使用的键盘界面
  • 节省空间:脚打印尺寸只有5 3/4" x 8 3/4"
  • 不会占用实验室或者操作台的不必要的空间
  • NE-1000系列包括所有的功能以及编辑程序

特殊使用:连续不断的注入(推进和抽出)以及双通道注射泵
用2NE-400 注射泵连接一个连接线时, 当一个注射泵持续注入时,另一支可以同步注入或者再装满

功能:

  • 编程程序:自动进行
  • 可以立操作或者通过计算机操作
  • 注入和回抽
  • 设定一个单的抽率和配液体积
  • 41次抽取阶段后将会改变抽率,设定一定的分配体积,按暂停,控制并回复输出信号,有蜂鸣声响起
  • 一台电脑可以对100个泵进行控制、检测和网络操作
  • 世界各种电源均可
  • 电机失速检测
  • 配液j确率+/-1%
  • 提供技术支持服务
  • 两年质保期

Syringe Size (cc)

Maximum Rate (mL/hr)

Minimum Rate (µL/hr)

0.5 µL

91.83

0.001

1 mL

191.2

1.459

3

693.4

5.291

5

1462

11.17

10

2160

16.49

20

3514

26.82

NE-8000高压注射泵

描述:
·NE-1000注射泵的所有编程功能。
·容纳1个注射器,最高可达140 mL。(部分填充200 mL)
·输注速率从1.733μL/ hr(1 mL注射器)到340.6 mL / min(140 mL注射器)
·NE-8000在低速时产生大约200磅的线性力,在最高速度下产生100磅的线性
力。压力输出相对于注射器尺寸。
NE-8000系列注射泵的特点:
· 内置可调节和可编程限位开关,用于输入和回退
· 可调节的力限制可减小最大力
· 完全可编程 ; 专为自动化而设计
· 独立运行或从计算机运行
· 设置单个泵送速率或分配量
· 编程多达41个泵送阶段,可改变泵送速率,设置分配量,插入暂停,控制和响应外部信号,发出蜂鸣声
· 点胶精度+/- 1%
注射器尺寸:140 mL(部分填充200 mL)
注射器数量:1
电机类型:步进电机
每转电机步数:200
微步进:1/8 to 1/1 depending on motor speed
每步前进:0.50511364 μm to 4.040909 μm depending on motor speed
外形尺寸:22.86 cm x 14.605 cm x 11.43 cm
重量:3.6 lbs. (1.63 kg)
操作
最高速度:30.033 cm/min
最低速度:0.00998882 cm/hr
最大抽速:340.6 mL/min with a 140 mL syringe
最低抽速:1.733 uL/hr with a B-D 1 mL syringe
最大力量:200 lbs.
Number of Program Phases:41
RS-232 pump network:最大100泵
RS-232 selectable baud rates:300, 1200, 2400, 9600, 19200
注射器内径范围:0.100 to 50.00 mm

NE-9000,NE-9000b,NE-9000G可编程蠕动泵

·从储液罐通过可更换的连续管道泵送。
·泵永远不会接触到液体。
·连续泵送。高达1000 mL / min(型号NE-9004)
·用于生产灌装瓶的测量分配。
·校准功能,提高精度。
·减速和防滴模式可改善点胶控制。
·可选择通过脚踏开关或外部传感器进行操作。
·完全可编程的计算机接口,适用于更高级的应用
·分配和抽出。
·快速更换泵头,以快速切换流体。
·Learn and Repeat™模式可提高分配效率。
·减速模式可提高分配精度。
·防滴模式可在分配后停止渗漏。
·校准模式可提高精度:误差小于3%。
·电源故障模式:电源中断后重新启动泵送程序。
·可选的体积单位为mL或oz。
·可选择的泵送速率单位为mL / min,mL / sec,oz / min,oz /
sec,或在设定时间内分配容积。
·用于复杂泵送应用的编程模式以及与外部设备的交互。
·脚踏开关控制。
·RS-232双向控制,可从PC完全控制。最多可连接100个泵和其他设备。
·数字逻辑控制:带有软件滤波控制输入的TTL I / O,用于消除控制输入上的毛刺和振铃。脚踏开关和其他设备的可配置TTL操作触发器。

·声音警报。
·所有操作参数和泵送程序的非易失性存储器。
NE-9000系统特点:
NE-9000B:
·该泵用于更高的流速和更大的分配量。
·带2个滚轮泵头和3/16"内径管。
·流速范围:0.035 mL/min to 775.2 mL/min。
·包括:PERI-HEAD-KIT-YB2(详情见下文)。
NE-9000B: ·该泵具有更低的流速和更小的分配量,可实现
更高的精度。
·带4个滚轮泵头和1/16"内径管
·流速范围:0.004 mL/min to 75.19 mL/min.
·包括:PERI-HEAD-KIT-YG4(详情见下文)。
NE-9004(未图示):
·该泵用于更高的流速和更大的分配量。
·带2个滚轮泵头和1/4"内径管
·流速范围:0.047 mL/min to 1038 mL/min.
·包括:PERI-HEAD-KIT-HGC2(详情见下文)

 

NE-1600 6通道注射泵

描述

·有2、4或者6个注射器,每支60cc

·注射率从0.452μL/hr(1cc注射器)到1451mL/hr(60cc注射器)

·易用按键界面

·包含所有功能和NE-1000系列程序特点

·附件分开出售

·完可编程;自动化功能

 

·微流体可用

 

Example Flow Rates(NE-1600)

注射器尺寸(cc

大比率(ml/hr

小比率(μl/hr)

0.5μl

16.66

0.001

1

34.69

0.73

3

125.7

2.646

5

265.4

5.581

10

392

8.244

20

637.6

13.41

30

838

17.63

60

1385

29.13


NE-1800 8通道注射泵

描述

·有2、4、6或者8个注射器,每支10cc

·注射率从0.568μL/hr(1cc注射器)到380mL/hr(10cc注射器)

·易用按键界面

·包含所有功能和NE-1000系列程序特点

·附件分开出售

 

Example Flow Rates(NE-1800)

注射器尺寸(cc

大比率(ml/hr)

小比率(μl/hr)

0.5μl

16.66

0.001

1

34.69

0.73

3

125.7

2.646

5

265.4

5.581

10

392

8.244

 

NE-1200 12通道注射泵

描述

·有24610或者12个注射器,每个3cc

·注射率从0.45μL/hr1cc注射器)到153.2mL/hr(3cc注射器)

·易用按键界面

·包含所有功能和NE-1000系列程序特点

·附件分开出售

 

Example Flow Rates(NE-1200)

注射器尺寸(cc

大比率(ml/hr)

小比率(μl/hr)

0.5μl

16.66μl/hr

0.001

2μl

69.82μl/hr

0.001

5μl

174.8μl/hr

0.003

1

54.21

0.452

3

153.2

1.515

注射器尺寸(μl&cc

大比率(μl/hr)

小比率(nl/hr)

0.5μl

18.7nl/min

0.008

1μl

37.57 nl/min

0.015

2μl

74.81 nl/min

0.029

5μl

2979 nl/min

1.117

10cc

445.6

167

20cc

722.9

270.9

30cc

940.7

352.5

60cc

1555

582.6


NE-500 OEM注射泵

描述:

·不含有内置用户界面

·底盘可安装:9 1/2”L×4 1/4”W×4 1/8”H(23.5×10.8×10.5cm)

·运行12V DC电源

·保存1注射器上升到60cc

·注射率从0.73μL/hr(1cc注射器)到2100μL/hr(60cc注射器)

·包含所有功能和NE-1000系列程序特点

·附件分开出售

·可以自定义变动的力学和固件

·电脑控制运转

 

·通过一个电脑网络,控制和显示达到100泵

打开底盘简单设计放入你的系统

 

Example Flow Rates(NE-500)

注射器尺寸(cc

大比率(ml/hr)

小比率(μl/hr)

0.5μl

25.49

0.001

1ml

53.09

0.73

3

192.5

2.646

5

406.1

5.581

10

600

8.244

20

975.8

13.41

30

1282

17.63

60

2120

29.13

 

Example Flow Rates(NE-510)

注射器尺寸(cc

大比率(ml/hr)

小比率(μl/hr)

0.5μl

91.83

0.001

1ml

191.2

1.459

3

693.4

5.291

5

1462

11.17

10

2160

16.49

20

3514

26.82

30

4619

35.25

60

7635

58.26

 


二、塑料、玻璃、不锈钢注射器—现货促销


三、注射泵其他配件

Syringe Heater Kit(注射泵加热器套件)

Ana-Box - Analog
Control Interface

Foot Switch &
Hand Pendant

RS-232 & USB
Primary Network Cables

RS-232 Secondary
Network Cable

OEM Starter Kit &
Net Starter Kit

Dual Pump Plumbing Kit

Dual Pump Sync Cable
 
Electronic Valve
Control Boxes

Advanced Features &
Memory Upgrades

Pump Software

Lockout Key

Syringe Heater Kit

Heater Kit is shown for demonstration purposes. Syringe pump and syringe are not included with Heater Kit.

现货询价

Model: HEATER-KIT-1LG

Model: HEATER-KIT-5SP


Description:

Thermo-Kinetic Heat Clamp for syringes that require temperature-controlled dispensing. Heats up to 185°C.

Specification Notes:

  • Available in 2 versions:
    • 1LG Heating Pad: 3.5" x 3.0" LxW (9 cm x 7.5 cm)
    • 5SP Heating Pad: 20" x 0.625" LxW (50 cm x 1.5 cm)
  • Heater Kit includes control unit and primary syringe heater pad 1LG version or 5SP version.
  • Multiple syringe heater pads can be attached to the control unit, under restricted conditions.
  • Set point and other parameters retained in memory
  • Digitally sets the heater set point
  • Controller will heat the syringe and hold the set temperature using an on/off or Thermo-kinetic control algorithm.
  • Dual temperature sensors in primary heating pad.
  • Alarm modes with multiple layers of protection to prevent temperature overrun.
  • Additonal heat protection for the pump may be needed when heating syringes above 100°C.
  • If you are in a country where the voltage is above 120V, you must purchase a step-down transformer (Model: PWR-220-110-E) along with the Heater Kit.

Second Heating Pad

现货询价

Model: HEATER-PAD2-1LG

Model: HEATER-PAD2-5SP

Model Size Attaches a Second Heating Pad To:
HEATER-PAD2-1LG 3.5" x 3.0" LxW (9 cm x 7.5 cm) HEATER-KIT-1LG
HEATER-PAD2-5SP 20" x 0.625" LxW (50 cm x 1.5 cm) HEATER-KIT-5SP

Third and Additional Heating Pads

现货询价

Model: HEATER-PAD3-1LG

Model: HEATER-PAD3-5SP

Model Size Attaches a Third+ Heating Pad To:
HEATER-PAD3-1LG 3.5" x 3.0" LxW (9 cm x 7.5 cm) HEATER-PAD2-1LG
HEATER-PAD3-5SP 20" x 0.625" LxW (50 cm x 1.5 cm) HEATER-PAD2-5SP

Specification Notes:

  • Only use identical primary and secondary heater pads together.
  • Each syringe heater control unit uses only the primary heating pad to sense temperature. All secondary heater pads connected to that control unit function according to temperature at the primary heater pad.
  • Careful consideration should be taken when using secondary/slave heater pads.
  • For different temperatures or variable environments, use separate control units with primary heater pads.
  • Plugging more than 12 syringe heater pads onto one controller is not recommended.

Ana-Box Closed Loop Analog Sensor Interface

Model: ADPT-ANABOX-11

现货询价

Description:

  • Vary the pumping rate in proportion to a variable voltage input
  • Start or stop pump at set voltages
  • Vary the pumping rate to maintain a voltage window
  • Attaches to any pump in the NE-1000 or NE-9000 Series

Foot Switch

Model: ADPT-FOOTSW-2

现货询价

Description:

  • Start, stop, or send a signal to a pumping program
  • 20 foot cable
  • Quick and easy setup
  • Utilizes the TTL logic port on the pump
  • Attach to any pump in the NE-1000 or NE-9000 Series for remote operation

Foot Switch Extender

Model: CBL-TTL-EXT

现货询价

Description:

  • 100 foot extension cable for the foot switch

Hand Pendant

Model: ADPT-HAND-SW

现货询价

Description:

  • Hand held pendant for remote operation of pump

Pump-to-PC RS-232 Primary Network Cable

Model: CBL-PC-PUMP-7 (7 ft. cable)

现货询价

Model: CBL-PC-PUMP-25 (25 ft. cable)

现货询价

Description:

  • Allows full control of pump or other device from a computer
  • DB-9 adapter connects to 9-pin serial port (25-pin adapters available upon request)
  • Utilizes the RS-232 communications port of device
  • Available in 7' and 25' length cable
  • Quick and easy setup

RS-232 to USB Converter

Model: CBL-USB232

现货询价

Description:

  • Adds an RS-232 serial port to your computer by attaching to a USB port
  • Includes software driver CD
  • Attaches to cable CBL-PC-PUMP-7

Pump-to-Pump Secondary Network Cable

Model: CBL-NET-7 (7 ft. cable)

现货询价

Model: CBL-NET-25 (25 ft. cable)

现货询价

Description:

  • Allows networking of two or more pumps or other device to a single computer
  • Quick and simple setup
  • Utilizes the RS-232 communications port of device
  • Available in 7' and 25' length cable
  • Requires first device to be connected with primary network cable

Dual Pump Plumbing Kit

Model: P-DKIT

现货询价

Description:

  • For use with our continuous infusion system or dual infusion system
  • Provides dual check valves for two syringes, withdraw will pull fluid from a reservoir and infusion will output into a separate line
  • The kit is pre-assembled - just attach the syringes
  • Each dual check valve uses 6" of 1/8" ID tubing connected to a Y connector, one for reservoir and one for output; each Y-connector has 5' of tubing to make connections to your application. Two 50 mL NormJect® Syringes are included

Individual parts are also available.
See our full line of syringes and plumbing supplies.

Pump Synchronization Cables

Model: CBL-DUAL-3

现货询价

Description:

  • Used for creating a continuous infusion system, dual infusion system, or one of the other 2 pump automation modes.
  • Establishes a communications link between two pumps using the RS-232 serial ports on the pumps.
  • Replaces cable CBL-TTL-1, unless the use of the TTL ports for synchronization is preferred
  • Download User Manual
 

Model: CBL-TTL-1

现货询价

Description:

  • Used for creating a continuous infusion system or dual infusion system
  • Synchronize pumping direction of two pumps so that they change directions, start, and stop as one unit
  • Utilizes the TTL logic port on pump - See new version above for using the RS-232 ports
  • 7' cable
  • Quick and easy setup

Lockout Mode Disable Key

Model: ADPT-LOCKOUT

现货询价

Description:

  • For use with a syringe or peristaltic pump's Lockout Mode
  • Prevent unauthorized or accidental changes to the settings by locking the keypad
  • The Lockout Disable key unlocks the keypad and allows settings to be changed
  • Attaches to the TTL logic port on the syringe or peristaltic pump
  • Quick and easy setup

OEM Starter & Net Kits:

For NE-5XX OEM models only

Model: OEM-STARTER

现货询价

Description:

Model: OEM-NET

现货询价

Description:

  • Power supply and secondary cable only. For use when networking two or more OEM NE-500 syringe pumps together. Must use the secondary cable in order to complete this application.

Single Valve Control Box

Model: ADPT-VALVE-INTERFACE-1

现货询价

Description:

  • Attach your 12V DC valve and the control box will open or close your valve according to the pumping direction
  • Utilizes the TTL logic port on syringe pump
  • Includes power supply for valve

Dual Valve Control Box

Model: ADPT-VALVE-INTERFACE-2

现货询价

Description:

  • Attach your two 12V DC valves and the control box will open or close your valves according to the pumping directions of your two pumps
  • Includes CBL-TTL-1 cable to allow synchronized pumping between two pumps
  • Utilizes the TTL logic ports on both syringe pumps
  • Includes power supply for valves