| description | specifications | polyacrylonitrile membranes the ap and av series of microza hollow fiber ultrafiltration modules feature unique double-skinned proprietary polyacrylonitrile (pan) membranes with dense internal layer. available in 6,000, 13,000, 50,000 and 80,000 molecular weight cut-offs, the modules are used in a range of pharmaceutical applications especially in purification and processing of aqueous enzymes and protein solutions. 80,000 mwco modules are especially useful for raw water pretreatment to pharmaceutical water purification plant.
materials of construction membrane polyacrylonitile
housing native clear polysulfone (p) or pvc (v)
potting material epoxy resin
gasket silicone (p) or butyl rubber (nbr) (v)
bacteriostat glycerin 65%, ethanol 2%, water balance
connectors and adapters for available connections, please refer to connectors and adapters..
key features
- hydrophilic polyacrylonitrile membrane provides low fouling and excellent flux recovery
- combination of high-strength and high-capacity due to unique membrane construction
- high-strength fiber allows reverse filtration to assist cleaning in difficult applications
- available in a range of sizes from 0.012 m (0.13 ft2) to more than 40 m2 (425 ft2)
- compatible for continuous operation up to 50 °c (122 °f)
- easily cleanable in most biological applications using minimum chemicals or detergents
- meets the specifications for biological tests listed in the current revision of usp for class vi plastics at 121 °c (249 °f)
- lgv and lov modules especially optimized for raw water duty
- ph 2 -10
part number1| part no. | rating (mwco, daltons) | fiber id/od (mm) | nominal length (mm) | membrane area (m2) | clean water flux (lh,25&nbs;藲c, 1bar) | crossflow rate for 1ms-1 fluid velocity | maximum pressure - feed/tmp/permeate (bar, 50 藲c) | volume feed side (ml) | volume permeate side (ml) | feed/retentate connection | permeate connection |
| aip-0013 | 6,000 | 0.8/1.4 | 130 | 0.017 | 0.8 | 181 | 1/1/2001 | 9 | 9 | a2 | a1 |
| aip-1013 | 6,000 | 0.8/1.4 | 347 | 0.19 | 10 | 724 | 2/3/2002 | 90 | 120 | b1 | b1 |
| aip-2013 | 6,000 | 0.8/1.4 | 552 | 1 | 50 | 1629 | 5/3/2003 | 300 | 500 | c4 | c3 |
| aip-3013 | 6,000 | 0.8/1.4 | 1129 | 4. | 1603655 | 5/3/2003 | 1200 | 2700 | c5 | c4 |
| aiv-3010 | 6,000 | 0.8/1.4 | 1126 | 4.7 | 170 | 3655 | 3/3/2003 | 1200 | 2700 | c7 | d2 |
| aiv-5010 | 6,000 | 0.8/1.4 | 1126 | 12.3 | 700 | 10134 | 3//20033800 | 5300 | c8 | d3 |
| acp-0013 | 13,000 | 0.8/1.4 | 130 | 0.017 | 2.6 | 181 | 1/1/2001 | 9 | 9 | a2 | a1 |
| acp-0053 | 13,000 | 1.4/2.3 | 130 | 0.012 | 1.6 | 222 | 1/12001 | 10 | 9 | a2 | a1 |
| acp-1010 | 13,000 | 0.8/1.4 | 347 | 0.19 | 34 | 724 | 2/3/2003 | 90 | 120 | b1 | b1 |
| acp-1050 | 13,000 | 1.4/2.3 | 347 | 0.12 | 19 | 776 | 3/3/2003 | 90 | 120 | b1 | b1 |
| acp-2013 | 13,000 | 0.8/1.4 | 552 | 1 | 160 | 1629 | 5/3/2003 | 300 | 500 | c4 | c3 |
| acp-2053 | 13,000 | 1.4/2.3 | 552 | 0.6 | 90 | 1773 | 5/3/2003 | 310 | 500 | | acp-3013 | 13,000 | 0.8/1.4 | 1129 | 4.7 | 750 | 3655 | 5/3/2003 | 1200 | 2700 | c5 | c4 |
| acp-3053 | 13,000 | 1.4/2.3 | 1129 | 3.1 | 360 | 3990 | 5/3/2003 | 1200 | 2850 | c5 | c4 |
| acv-3010 | 13,000 | 0.8/1.4 | 1126 | 4.7 | 830 | 3655 | 3/3/2003 | 1200 | 2700 | c7 | d2 |
| acv-3050 | 13,000 | 1.4/2.3 | 1126 | 3.1 | 420 | 3990 | 3/3/2003 | 1200 | 2700 | c7 | d2 |
| acv-5010 | 13,000 | 0.8/1.4 | 1126 | 12.3 | 2200 | 10134 | 3/3/2003 | 3800 | 5300 | c8 | d3 |
| acv-5050 | 13,000 | 1.4/2.3 | 1126 | 7.8 | 1100 | 11084 | 3/3/2003 | 3800 | 5300 | c8 | d3 |
| lgv-3010 | 13,000 | 0.8/1.4 | 1126 | 7.6 | 500 | 3257 | 3/3/2003 | - | - | c7/d2 | c7 |
| lgv-5210 | 13,000 | 0.8/1.4 | 2227 | 41 | 4000 | 8686 | 3/3/2003 | - | - | c8/d3 | c8 |
| ahp-0013 | 50,000/td> | 0.8/1.4 | 130 | 0.017 | 7.6 | 181 | 1/1/2001 | 9 | 9 | a2 | a1 |
| ahp-1010 | 50,000 | 0.8/1.4 | 347 | 0.19 | 82 | 724 | 2/2/2002 | 90 | 120 | b1 | b1 |
| ahp-2013 | 50,00 | 0.8/1.4 | 552 | 1 | 460 | 1629 | 4/2/2002 | 300 | 500 | c4 | c3 |
| ahp-3013 | 50,000 | 0.8/1.4 | 1129 | 4.7 | 2250 | 3655 | 4/2/2002 | 1200 | 2700 | c5 | c4 |
| ahv-3010 | 50,000 | 08/1.4 | 116 | 4.7 | 2500 | 3655 | 3/2/2002 | 1200 | 2700 | c7 | d2 |
| lov-3010 | 80,000 | 0.8/1.4 | 1126 | 7.6 | 1500 | 3257 | 3/3/2003 | - | - | c7/d2 | c7 |
| lov-5210 | 80,000 | 0.8/1.4 | 2227 | 417000 | 8686 | 3/3/2003 | - | - | c8/d3 | c8 |
1 third letter represents housing material: p - clear native polysulfone with silicone gasket, v - white (gray - lgv, lov) pvc with butyl rubber gasket
2 nominal length is flange to flange, or to ends of connectors on quick-connect modules. detailed drawings available upon request.
3 guideline module filling volume to allow calculation of minimum system working volumes when added to volumes of attached piping and other components. drained residual volumes are considerably less. appliations polysulfone memranes microza sp, sv and vp series hollow fiber ultrafiltration modules have a unique double-skinned proprietary polysulfone (ps) membrane with dense internal layer. currently available in 3000, 4000, 6000, and 10000 molecular weight cut-offs, the modules are used in a range of pharmaceutical applications including pyrogen removal from water, buffer solutions active ingredients such as antibiotics, and concentration of protein solutions. sv modules are used for clarifying antibiotic and other broths used for small molecule api production. materials of construction membrane polysulfone (with silicone coating on ends in vip-3017s)
housing native clear polysulfone (p) or pvc (v)
potting material epoxy resin
gasket silicone (p) or butyl rubber (nbr) (v)bacteriostat lycerin 65%, ethanol 2%, water balance
connectors and adapters contact pall for wide range of fittings for these modules connectors and adapters for available connections, please refer to connectors and adapters. key features
- combination of high-strength and high-flow due to unique membrane construction
- double-skin provides assurance of removal rating
- high-strength fiber allows reverse filtration to assist cleaning in difficult applications
- available in a range of sizes from 0.015 m2 (0.16 ft2) to more than 12 m2 (125 ft2)
- all sp and vp modules may be hot water sanitized: up to 95 °c (203 °f) - sip and slp, or 90 °c (194 °f) - sep and sap; and all may run continuously a 80 °c (176 °f)
- sp modules may be autoclavd in single use applications
- vip 6000 mwco version steam-sterilizable up to 50 cycles at 125 °c (257 °f) at a differential pressure of 100 mbar
- sv modules are designed for maximized recovery in bulk fermentation, limited to 50 °c (122 °f)
- compatible with a wide range of cleaning agents, up to 5000 ppm sodium hypochlorite or 4% sodium hydroxide
- meets the specification for biological tests listed in the current revision of usp for class vi plastics at 121 °c (249 °f)
- ph range 1 - 14
part numbers1 col width=90>| part no. | rating (mwco, daltons) | fiber id/od (mm) | nominal length (mm)/td> | membrane area (2) | clean water flux (l/h, 25 藲c, 1bar) | crossflow rate for 1ms-1 fluid velocity | maximum pressure - feed/tmp/permeate (bar, 50 藲c) | volume feed side (ml) | volume permeate side (ml) | feed/retentate connection | permeate connection | | sep-0013 | 3,000 | 0.8/1.4 | 130 | 0.017 | 2.2 | 181 | 1/1/2001 | 9 | 9a2a1 | | | sep-1013 | 3,000 | 0.8/1.4 | 347 | 0.2 | 25 | 724 | 3/3/2002 | 90 | 120 | b1 | b1 | | sep-13 | 3,000 | 0.8/1.4 | 552 | 1 | 130 | 1629 | 5/3/2002 | 300 | 500 | c4 | c3 | | sp-13 | ,000 | 0.8/1.4 | 1129 | 4.7 | 650 | 3655 | 5/3/2003 | 1200 | 3700 | c5 | c4 | | sap-0013 | 4,000 | 0.8/1.4 | 130 | 0.017 | 3.6 | 181 | 1/1/2001 | 9 | 9 | a2 | a1 | | sap-1013 | 4,000 | 0.8/1.4 | 347 | 0.236 | 724 | 3/3/2002 | 90 | 120 | b1 | b1 | | sap-3013 | 4,000 | 0.8/1.4 | 1129 | 4.7 | 900 | 3655 | 5/3/2003 | 1200 | 3700 | c5 | c4 | | sav-3013 | 4,000 | 0.8/1.4 | 1126 | 5.6 | 1100 | 4343 | 5/3/2003 | 1200 | 3700c7 | d2/td> | | sav-5013 | 4,000 | 0.8/1.4 | 1126 | 12.1 | 2400 | 9950 | 5/3/2003 | 3800 | 5300 | c8 | d3 | | sip-0013 | 6,000 | 0.8/1.4 | 130 | 0.017 | 3.4 | 181 | 1/1/2001 | 9 | 9 | a2 | a1 | | ip-1013 | ,000 | 0.8/1.4 | 347 | 0.2 | 40 | 724 | 3/3/2002 | 90 | 120 | b1 | b1 | | sip-1023 | 6,000 | 0.8/1.1 | 347 | 0.2 | 44 | 724 | 3/3/2002 | 90 | 130 | b1 | b1 | | sip-2013 | 6,000 | 0.8/1.4 | 552 | 1 | 00 | 1629 | 5/3/2002 | 300 | 500 | c4 | c3 | | sip-3013 | 6,000 | 0.8/1.4 | 1129 | 4.7 | 1000 | 3655 | 5/3/2003 | 1200 | 3700 | c5 | c4 | | sip-3023 | 6,000 | 0.8/1.1 | 1129 | 7.2 | 1700 | 5610 | 5/3/2003 | 700 | 3700 | c5 | | c4 | | vip-3017s | 6,000 | 0.8/1.4 | 1129 | 4.7 | 1000 | 3655 | 5/3/2003 | 1200 | 3700 | c5 | c4 | | slp-0053 | 10,000 | 1.4/2.3 | 130 | 0.015 | 4.1 | 277 | 1/1/2001 | 11 | 9 | a2 | a1 | | slp-1053 | 10,0001.4/2.3 | 347 | 0.1 | 40 | 776 | 3/3/2002 | 85 | 120 | b1 | b1 | | slp-2053 | 10,000 | 1.4/2.3 | 552 | 0.6 | 150 | 1773 | 5/3/2002 | 310 | 500 | c4 | c3 | | slp-3053 | 10,000 | 1.4/2.3 | 1129 | 4.5 | 1500/td> | 5819 | 5/3/2003 | 1850 | 3700 | c5 | c4 |
1 third letter represents housing material: p - clear native polysulfone with silicone gasket, v - white pvc with butyl rubber gasket.
2 nominal length is flange to flange, or to ends of connectors on quick-connect modules. detailed drawings available upon request.
3 guideline module filling volume to allow calculation of minimum system working volumes when added to volumes of attached piping and other components. drained residual volumes are considerably less.
4 vip-3017s - maximum inlet pressure for steam at 121 °c is 1.1 barg, max tmp 0.1 barg, filtrate pressure 0 (open steaming, no back pressure). | performance/nobr> | polyvinylidenedifluoride membranes the u series of microza hollow fiber microfiltration modules feature unique proprietary membranes in specially resistant pvdf for microfiltration applications. available in 0.2 µm (um series) and 0.65 µm (uj series) rating, the modules are used in a range of pharmaceutical applications especially in cell harvesting, perfusion cell culture, viral vector production, and clarification of microbial extracts.
materials of construction membrane polyvinyldenedifluoride
housing native clear polysulfone (p) or filled polysulfone (w)
potting material epoxy resin
gasket silicone (p)
bacteriostat glycerin 65%, ethanol 2%, water balance
connectors and adapters for available connections, please refer to connectors and adapters.
key features
- lw non-specific protein binding for long trm flux maintenance in cell culture applications
- superior chemical resistance of microza pvdf ensures compatibility in a broad range of processing and cleaning applications
- highly characterized,optimized void structure ensures reproducible separation efficiency and high throughput
- high-strength fiber allows reverse filtration to optimize yield and performance in difficult applications
- available in a range of sizes from 0.02 m2 (0.21 ft2) to 5 m2 (54 ft2)
- u series can operate continuously in processes up to 80 °c (176 °f) and may be steamed in situ at 125 °c (257 °f) for 20 cycles
- meets the specification for biological tests listed in the current revision of usp for class vi plastics at 121 °c (249 °f)
- ph 2 - 10
1 | part no. | rating (mwco, daltons) | fiber id/od (mm) | nominal length (mm) | membrane area (m2) | clean water flux (l/h, 25 藲c, 1bar) | crossflow rate for 1ms-1 fluid velocity | maximum pressure - feed/tmp/permeate (bar, 50 藲c) | volume feed side (ml) | volume permeate side (ml) |
| ump-053 | 0.2 | 2.6/4.1 | 130 | 0.015 | 1.5 | | 287 | 1/1/2001 | a1 | a2 |
| ump-153 | 0.2 | 2.6/4.1 | 347 | 0.08 | 8 | 956 | 3/3/2003 | b1 | b1 |
| ump-353 | 0.2 | 2.6/4.1 | 1129 | 2.2 | 200 | 5161 | 3/3/2003 | c5 | c3 |
| umw-553 | 0.2 | 2.64.1 | 1172 | 5 | 500 | 12424 | 3/3/2003 | c5 | d3 |
| ump-0047r | 0.2 | 1.4/2.2 | 310 | 0.02 | 19 | 116 | 3/3/1.5 | c1 | a1 |
| ump-1047r | 0.2 | 1.4/2.2 | 320 | 0.09 | 80 | 554 | 3/3/1.5 | c2 | c1 |
| ump-1147m | 0.33 | 330 | 953 | 3/3/1.5 | c2 | c1 |
| ump-1147r | 0.2 | 1.4/2.2 | 550 | 0.19 | 180 | 554 | 3/3/1.5 | c2 | c1 |
| ump-2147r | 0.2 | 1.4/2.2 | 546 | 0.77 | 750 | 2216 | 3/3/1.5 | c3 | c2 |
| ump-3147r | 0.2 | 1.4/2.2 | 630 | 2 | 2000 | - | 3/3/1.5 | c4 | c3 |
| ump-3247r | 0.2 | 1.4/2.2 | 1129 | 4 | 4000 | - | 3/3/1.5 | c4 | c3 |
| ujp-1047r | 0.65 | 1.1/2.0 | 316 | 0.1 | 120 | 462 | 3/3/1.5 | c2 | c1 |
| 0.65 | 1.1/2.0 | 546 | 0.32 | 380 | 708 | 3/3/1.5 | c2 | c1 |
| ujp-1147r | 0.65 | 1.1/2.0 | 546 | 0.19 | 230 | 428 | 3/3/1.5 | c2 | c1 |
| ujp-2147r | 0.65 | 1.1/2.0 | 546 | 0.73 | 8501625 | 3/3/15 | c3 | c2 |
| ujp-3147r | 0.65 | 1.1/2.0 | 630 | 1.9 | 2300 | - | 3/3/1.5 | c4 | c3 |
| ujp-3247r | 0.65 | 1.1/2.0 | 1129 | 3.8 | 4600 | - | 3/3/1.5 | c4 | c3 |
1 third letter represents housing material: p - clear native polysulfone with silicone gasket, v - white (gray - lgv, lov) pvc with butyl rubber gasket
2 nominallength is flange to flange, or to ends of connectors o quick-connect modules. detailed drawings available upon request.
sup>3 guideline module filling volume to allow calculation of minimum system working volumes when added to volumes of attached piping and other components. drained residual volumes are considerably less. additional information | polyolefin membranes the p series of microza hollow fiber microfiltration modules feature unique proprietary membranes in polyolefin for general microfiltration applications. available in 0.1 µm rating, the modules are used in a range of pharmaceutical applications especially in clarification of microbial cultures for enzyme production, clarification of natural product extracts, and nutraceutical production.
materials of construction
strong>membrane polyolfin
housing native clear polyulfone (p)or pvc (v)
potting material epoxy resin
gasket silicone (p)
bacteriostat glycerin 65%, ethanol 2%, water balance
connectors and adapters for available connections, please refer to connectors and adapters.
key features
- available different internal fiber diameters provides suitability for processes with varying particulate or colloidal loading
- broad chemical resistance ensures compatibility in a wide range of processing and cleaning conditions
- highly characterized,optimized void structure ensures reproducible separation efficiency and high throughput
- high-strength fiber allows reverse filtration to optimize yield and performance in difficultapplications
- available in a range of sizes from0.09 m2 (1 ft2) t over 8 m2 (85 ft2)
- p series compatible for continuous operation up to 50 °c (122 °f)
- meets the specification for biological tests listed in the current revision of usp for class vi plastics at 121 °c (249 °f)
part number1 | rating | fiber | nominal | membrane | clean | crossflow | | (mwco, | id | length2 | area | water flux | rate for |
| daltons) | | | | lh -1 bar | 1ms-1 fluid |
| strong> | | | | | | velocity |
| psp-103 | 0.1 | 0.7 mm | 347 | .2 | 25 | 554 |
| psp-113 | 0.1 | 1.9 mm | 347 | 0.1 | 7 | 714 |
| wsp-143 | 0.1 | 1.4 mm | 347 | 0.09 | 13 | 554 | /tr>
| psp-303 | 0.1 | 0.7 mm | 1129 | 6 | 700 | 3879 |
| psv-303 | 0.1 | 0.7 mm | 1126 | 6 | 700 | 3879 |
| psv-313 | 0.1 | 1.9 mm | 1126 | 2.9 | 240 | 4900 |
| wsp-543 | 0.1 | 1.4 mm | 1172 | 8.2 | 930 | 11083 |
| rating | maximum | volume | volume | feed/ | permeate |
| (mwco, | pressure | feed | permeate | retentate | connection |
| daltons) | (barg) at | side3 | side3 | connection | |
| | 50 ° (122 °f) | | | | |
| psp-103 | 0.1 | 3/2.2/2 | 90 | 120 | b1 | b1 |
| psp-113 | 0.1 | 3/2.5/2 | 110 | 110 | b1 | b1 |
| wsp-143 | 0.1 | 3/2.5/2 | 90 | 120 | b1 | b1 |
| psp-303 | 0.1 | 5/2.2/3 | 1200 | 2700 | c5 | c4 |
| psv-303 | 0.1 | 5/2.2/3 | 1200 | 2700 | c7 | d3 |
| psv-313 | 0.1 | 5/2.5/3 | 1500 | 2600 | c7 | d3 |
| wsp-543 | 0.1 | 4/25/4 | 3800 | 5300 | c7 | c6 |
1 third letter represents housing material: p - clear native polysulfone with silicone gasket, v - white (gray - lgv, lov) pvc with butyl rubber gasket
2 nominal lengthis flange to flange, or to ends of connectors on quick-connect modules. detailed drawingsavailable upon request.
3 guideline module filling volume to allow calculation of minimum system wrking volumes when added to volumes of attached piping and other components. drained residual volumes are considerably less. ordering
information | |
