MIDMARK M9全自动消毒柜（现货）M9公路（四）产品规格：Overall length: 18.81" (47.8 cm)总长度：18.81“（47.8厘米）
Overall width: 15" (38.1 cm)总宽：15“（38.1厘米）
Overall height: 16.44" (41.8 cm)总高度：16.44“（41.8厘米）Countertop area:台面面积：
Minimum depth 18" (45.7 cm)最小深度18“（45.7厘米）Chamber:会议厅：
9" diameter (22.9 cm)9“直径（22.9厘米）
15" depth (38.1 cm)15“深度（38.1厘米）
3.5 gal.3.5加仑。usable volume (13.4 liters)可用容量（13.4升）Trays:托盘：
Two large - 12" L x 7.31" W x .88" D两个大- 12“长x 7.31”宽x 0.88的“D
(30.5 x 18.6 x 2.2 cm)（30.5 × 18.6 × 2.2厘米）
Two small - 12" L x 5.62" W x .88" D两个小- 12“长x 5.62”宽x 0.88的“D
(30.5 x 14.3 x 2.2 cm)（30.5 × 14.3 × 2.2厘米）Unit Weight:70 lbs.单位重量：70磅。(31.8 kg)（31.8公斤）Shipping Weight:78 lbs.运输重量：78磅。(35 kg)（35公斤）Water reservoir capacity:水库容量：
.88 gal.0.88加仑。(3.3 liters)（3.3公升）Electrical电动
120 VAC, 60 Hz, 12 AMPS120伏交流电，60赫兹，12个专才
120 VAC has 1425 watt tubular immersion heater120伏交流已一千四百二十五瓦特管状电热水壶
UL and CUL ListedUL和CUL上市
CSA CertifiedCSA认证
220-240 VAC, 50-60 Hz, 7 AMPS220-240伏交流电，50至60赫兹，7专才
220-240 VAC has 1500 watt tubular immersion heater220-240伏交流电已一五○○瓦特管状电热水壶
100 VAC, 50-60 Hz, 15 AMPS100伏交流电，50至60赫兹，15个专才
100 VAC has 1425 watt tubular immersion heater100伏交流电已一千四百二十五瓦特管状电热水壶
A separate (dedicated) circuit is recommended for this sterilizer一个单独的（专用）电路，建议本灭菌器
Meets the requirements of ASME Boiler and Pressure Vessel Code会见的要求和压力容器规范ASME锅炉如需要购买该商品或想了解其参数、库存量等更多信息，请先与我司联系。
 

M9 UltraClave Features: Pulse-air Removal Technology The M9's Steam-Flush Pressure-Pulse Air Removal System is so efficient that it can pass the air removal tests required on more complex vacuum steam autoclave systems, thus ensuring good steam penetration for those challenging loads. Plus, less complexity means better reliability and a cost effective solution for your sterilization needs. Convenience at a Glance The LCD display indicates cycle selected, cycle temperature and exposure time. When the cycle enters sterilization mode, the temperature, pressure, and the remaining cycle time is displayed. Remaining cycle time is also displayed in the dry mode. Note: Temperature & pressure are not displayed during dry mode. No More Wet Instruments Once the sterilization is complete, the door of the autoclave opens automatically and quietly to dissipate steam and dry your instruments. You'll have dry, sterile instruments every time. Safety Features If the door is not closed completely or the reservoir water level is low, the LCD display will provide the appropriate message. In either case, sterilization will not continue until you've attended to the unit. Ease of Draining & Filling For ease of draining and filling, the M9's reservoir fill port and drain tube are in the front of the unit, not on top or in back. Optional Printer Accessory The M9 printer accessory provides a permanent record of cycle times, temperatures and pressures during a cycle. Self Program Controls Programmable controls allow for creation of different cycle parameters for special sterilization needs. Programmable buttons allow you to change the following: Exposure Time (3 to 90 minutes), Temperature (230 to 275?F), Dry Time (0 to 60 minutes), or Vent (slow or fast). The #1 and #2 buttons allow you to store the change if desired. Pre-Programed Controls Four pre-programmed sterilization cycle controls: Unwrapped (132?C or 270?F for 3 minutes), Pouches (132?C or 270?F for 5 minutes), Packs (121?C or 250?F for 30 minutes), Handpieces (unwrapped and pouched) (132?C or 270?F for 6 minutes). LCD Display Indicates cycle selected, temperature and exposure time. During the cycle, the display shows messages describing status of cycle. When the cycle enters sterilization mode, remaining time isdisplayed as well as temperature and pressure.