MK-10干式恒温器(加热型)
型号:： MK-10
价格:请致电：010-57128832,18610462672
品牌: dobio    产品商标: mk-10

 

MK-10 干式恒温器(加热型)
 MK-10干式恒温器是采用微电脑控制的恒温金属浴装置,以代替传统的水浴装置,可广泛应用于样品的保存和反应、DNA 扩增和电泳的预变性、血清凝固等。MK-10系列干式恒温器是一款外观精美、性能卓越的新型恒温金属浴。
产品特点：
即时温度显示、时间递减显示
■ 在双节时间、温度设置
■ 自动故障检测及蜂鸣器报警功能
■ 温度偏差校准功能
■ 便捷的模块更换，便于清洁与消毒
■ 内置超温保护装置
■ 蓝色液晶屏显示，薄膜开关
性能指标：
■ 最大功率：150W
■ 外形尺寸：300x220x170 mm
■ 净重：2.5Kg
■ 控温范围：室温+5℃~100℃
■ 升温时间：≤15min (从20℃升至100℃)
■ 温度稳定性@100℃：≤±0.5℃
■ 模块最大温差@40℃：0.3℃
■ 模块温度均匀性：≤±0.3℃
■ 显示精度：0.1℃
■ 时间设置最长：99h59min
■ 最高温度：105℃
■ 模块型号选择：参见MK-10系列可更换模块
  

nd-clip: initial; background-position: initial; background-repeat: initial;"> Thermal Conductivity 0.01 to 400 W/m/K. Thermal Diffusivity 0.1 to 100 mm²/s. Specific Heat Capacity Up to 5 MJ/m³K. Measurement Time 20 to 1280 seconds. Reproducibility Typically better than 1 %. Accuracy Better than 5 %. Temperature Range -253 °C to 1000 °C. With Furnace Ambient to 750 °C [1000 °C oxygen free]. With Circulator -35 °C to 200 °C Power Requirements Adjusted to the line voltage in the country of use. Smallest Sample Dimensions

3 mm × 13 mm diameter or square for bulk testing.

20 mm × 7 mm diameter or square for one-dimensional testing.

Sensor Types Available

Kapton sensors: 5465, 5501, 8563, 4922, 5599.

Mica sensors: 5465, 5082, 4921, 4922, 5599.

Teflon sensors: 5465, 5501.

Meets ISO Standard 22007-2.

Key Features

Back to top

Sensors: The TPS 1500 operates a selection of Hot Disk sensors suitable for different materials and applications.

Temperature Control: Automatic Temperature series measurements (Isothermal Steps) are easy to perform using either an optional external Furnace or a temperature-controlled Circulating Bath. The Hot Disk Analysis software and TPS 1500 instrument controls the external device using RS-232 protocol.

Everything to get you started: The basic TPS 1500 system includes everything necessary to begin making measurements, including installation and on-site training. The instrumentation includes: Software with standard isotropic module, one Sensor, Stainless Steel verification samples and a Room-Temperature Sample Holder.

Optional Software Modules: In addition to the standard ISOTROPIC and ONE-DIMENSIONAL modules, optional ones for ANISOTROPIC, SPECIFIC HEAT CAPACITY, and LOW-DENSITY, HIGHLY-INSULATING SAMPLES are available.