不沾水PTFE排气过滤器
英文名称： HYDROPHOBIC PTFE VENTING FILTERS
型号:： Mu
价格:请致电：010-57128832,18610462672
品牌: 瑞典

 

HYDROPHOBIC PTFE VENTING FILTERS ----不沾水PTFE排气过滤器
For small containers and air venting bottles,we have a 26 mm polyester-reinforced 0.2um PTFE venting filter. The connectors are luer lock-female and male.适应罐、排空瓶等小型容器，我们提供26mm加固涤纶外壳 0.2um孔径PTFE排气过滤器。耐压6公斤，过滤面5.3cm2,流速1.4 l/min(▲p=1 bar),Luer lock 雌、雄连接器，无菌消毒或不消毒均可。
The housing-made of cyrolite-withstands a maximum pressure of 6 bar. The filters can be supplied in both sterile and non-sterile version. 
 

SPECIFICATION FOR 26 MM VENTING FILTERS

      Air Flow Rates            abt. 1.4 l/min at▲p=1 bar
      Filter Area                 5.3cm2
      Bubble Point              1.2bar min. values with isopropanol
     Bubble Strength            6.0bar(600kPa;87psi)
Water Penetration Point      ≥4.0bar(400kPa;58psi)
 

 

 
 
＊For ordering information please refer to the enclosed grade index.
          
 64 MM PTFE VENTING FILTER   64 mm PTFE 排气过滤器
 
   For containers of culture media, small fermenters and other containers needing sterile ventilation, we have developed a 64 mm venting filter with a hydrophobic PTFE membrane. The membrane is reinforced with a polypropylene grid.
   We offer two different pore sizes – 0.2 and 0.45 um – and two different connectors –hose nipple inlet/outlet and 1/8” male NPT. The venting filters are available in both sterile and non-sterile version. Our unique design allows high air flow at low differential pressures. 适应容器培养基、小发酵罐、槽和其他器皿的无菌通风需要，我们提供先进的64mm不沾水PTFE膜排气过滤器，这种过滤器的膜使用聚丙烯格栅加固，所有材料通过USP生物研究安全VI级测试。有无菌消毒和不消毒0.2和0.45um两种不同孔径、橡皮嘴出、入口和 1/8”雌NPT两种不同连接器可供选择，我们独有的设计允许低压差高流速。
 
SPECIFICATION FOR 64 MM VENTING FILTERS
   Pore Size                0.2um ; 0.45um      
   Biosafety         all materials pass USP Plastics Test Class VI
   Bubble Point      min. value with isopropanol is 1.4bar （140kPa）
                   for 0.2um unit （1,1bar after autoclaving）
                   and 0.9bar (90kPa) for 0.45um unit
   Connectors       Hos nipples for 6 to 12mm i.d. tubing as well as luer inlet
for luer syringes; connector 1/8” external NPT
   Filter Area        20 cm2
  Air Flow Ratea    typical values for 0.2um pore size:
                   1.1 l/min at 0.02bar(1.8l/min for 0.45um)
                   2.9 l/min at 0.05bar （4.6 l/min for 0.45um）
                   5.0 l/min at 1.0 bar (8.5 l/min for 0.45um) 
   Housing         64 mm        polypropylene
Materials        PTFE-Membrane filters, reinforced with polypropylene grid
 Limits           max.pressure -3bar(300kPa)
                   max. temperature 134℃
   Sterilization      autoclave at 121℃(at least 20 times) or 134℃
   Priming Volume      approx. 3 ml
  Water Penetrations Point     approx. 4.0 bar (0.2um)，3.0bar (0.45 um)