| 压力过滤装置 英文名称： READY-TO-USE PRESSURE FILTRATION UNITS |
| 型号:： Mu |
| 价格:请致电：010-57128832,18610462672 |
| 品牌: 瑞典 |
压力过滤装置-随时可以使用 READY-TO-USE PRESSURE FILTRATION UNITS 这些压力过滤装置是为可靠无菌过滤组织方案设计的。过滤面积大、自动排气、允许高流速。连接一个泵，这些过滤器适合过滤100ml-5L介质和水相溶剂 These pressure filtration units are designed for reliable sterile filtration of tissure solutions. They have a large filtration area and an automatic venting which allows high flow rates. Attached to a pump, these filters are suitable for the filtration of 100ml up to 5liters of media and aqueous solutions. They come in a polycarbonate hosing and have a female lure lock or hose nipple connector. SPECIFICATION FOR SCAP SCAP 参数 Adsorption less than 10 ug per cm2 found in tests with g-Globulin 吸附作用 用g-球蛋白测试不小于10ug/cm2 Bubble Point minimum value is 3.4bar (340KPa) 始沸点 最小值3.4bar(340KPa) Connectors 入口雌鲁尔锁6-12mminlet female luer lock (6-12mm) 连接 出口加强软管接头Out stepped hose nipple (6-12mm) Cytotoxicity 无毒-采用MRC- 5人胚肺细胞non-toxic as confirmed with MRC-5 embryonic lung cells 细胞毒性 and L-929 mouse fibroblast cells 和L- 929小鼠成纤维细胞确认证实 Extractables pass the USP plastic test class VI 萃取物 通过美国药典（USP）VI级塑料测试 Filling volume 6.0ml 灌装量 6.0ml Filtration Area 20cm2 过滤面积 20cm2 Flow Rates typical flow rate for water at 250 ml/min bei △p-1bar(100kPa) 流速 典型流速-水--△的P -1bar（100kPa）250毫升/分钟 Idle Volume 0.3ml after bubble point, 1.3ml before bubble point 空闲容量 泡点后0.3ml,泡点前1.3ml Materials cellulose acetate membrane filter(0.2um), PTFE vent. filter, polycarnate housing 材质 醋酸纤维素膜过滤器（0.2um），PTFE排气过滤器，聚碳酸酯室 Housing Polycarbonate 外壳 聚碳酸酯 Max.Pressure max. recommended initial pressure during filtration =bar(300KPa) 过滤工作中推荐最大初始压力300KPa 最大压力 The hosing withstands at least 5 bar (500KPa) 室耐压至少500KPa 北京威斯孚科技有限公司 www.wsf-tech.com; QQ 972749685 01062934462
|