|
|
| |
|
Miniature Incubator for motorized and type K microscope stages,
TC-MI-20x46
Designed for live cell imaging and time-lapsed microscopy. Can be used for long-term
imaging: see cell chemotaxis tracks obtained during 8 hours incubation.
This incubator can be used with 50mm dishes and chambers, slides/coverglasses,
and, in combination with 50mm reducing inserts TC-PA50 (and TC-PA-C, -N, -F, -W), with 35 dishes
and coverslip holders CSC and UTIC.
Incorporates a luer-port for gas mixture (to control CO2 and hypoxia), inside reservoir for water to control humidity,
and heated lid (purchased separately) to prevent condensation. Built-in multiple sealed ports for tubing and accessories (probes and sensors).
Can be upgraded with an objective heater for immersion optics.
Fits all brands of motorized stages and Zeiss type K stages with 160x110mm insert
(adapters for other stages are available, see the table below). An optional set of
adjustable tubing
holders MH-MIS allows you to position perfusion tubing
for continuous media exchange.
Requires a temperature controller. Click on images to enlarge.
For different size samples, consider TC-MWP incubator, which accepts various inserts designed specifically
for multiple or
larger samples: from 50-60mm dishes to four Petri dishes or four coverslip holders.
Brand |
extension (if required) |
Ludl, Prior, ASI, Marhauser,
Zeiss |
no extension required |
Nikon 236x155mm: |
TC-MI-NIK |
Thorlabs 170x130mm: |
TC-MI-THOR |
Ludl Bioprecision II, 172x116mm: |
TC-MI-LUDL |
Specifications: |
Outside dimensions: |
Fits
160x110mm cutout of motorized stages; the bottom is recessed
7mm below the mounting surface, comes with 3mm spacers to
reduce this recessed profile to 5mm; can be leveled by set screws positioned in the corners of the incubator base |
Optical window and
clearance: |
40mm from bottom to top surface; 20mm (15mm inside
clearance) for low-profile; can be elevated using optional 9.5mm spacers
option |
Use with: | 50mm and
35mm dishes, 1x3in. glass coverglasses/slides, coverslip
holders CSC |
Stability: | 0.01°C |
Condensation free lid: | Uses
a built-in temperature sensor to connect independently to
the second channel of temperature controllers, 65x75mm optical window |
CO2 port: | Luer connector to a source of gas mixture. |
Water reservoir: | Controls humidity. Can be replenished through outside ports. |
Media exchange and perfusion: |
Multiple sealed inflow/outflow ports, an
optional set of adjustable tubing holders to position inflow and outflow tubing inside sample chambers. |
Adapter for ThorLabs stages TC-MI-THOR
If attached to the bottom of incubators
for motorized stages, allows you to fit the incubator inside 170x130mm cutout of ThorLabs stages.
Includes two pieces for both sides.
Adapter for Nikon motorized stages TC-MI-NIK
If attached to the bottom of
incubators for motorized stages, allows you to fit the incubator inside 236x155mm cutout of Nikon motorized
stages. Includes two pieces for both sides. Item#: TC-MI-NIK
Click on catalog numbers below to purchase online.
Required accessories: temperature controller,
CO2/hypoxia controller.
Optional accessories: objective heater,
perfusion system and accessories,
flow control.
Download PDF manual.
Download PDF catalog.
|
|
Bioscience Tools
ph: 010-6759703, fax: 010-6759703
email: chengyuan@bio-goods.com
|
PRICES AND OPTIONS |
TC-MI-20x46 |
|
Miniature Incubator for motorized stages
|
TC-MIL |
|
Low-Profile Lid for Miniature Incubator TC-MIL
|
TC-I-E |
|
Spacer to elevate the cover 9.5mm (ships
installed)
|
TC-MI-THOR |
|
Adapter for ThorLabs stages, 170x130mm
|
TC-MI-NIK |
|
Adapter for Nikon motorized stages, 236x155mm
|
TC-MI-LUDL |
|
Adapter for Ludl Bioprecision II stages,
172x116mm
|
MH-MIS |
|
Set of miniature adjustable tubing and sensor holders, x3, includes 4-40 threaded posts
(two holders come with incubators) |
TC-PA-C |
|
Reducing adapter-ring, for Corning type dishes.
|
TC-PA-N |
|
Reducing adapter-ring, for Nunc type dishes.
|
TC-PA-W |
|
Reducing adapter-ring, for Willco dishes.
|
TC-PA-F |
|
Reducing adapter -reducing rings-, for FluoroDishes.
|
TC-PA50 |
|
50mm reducing adapter-ring for 35mm dishes. |
|
|
)
)
)
){kind=link}