|
|
| |
|
Gas flow controller, PC-MI
Designed for live cell imaging and time-lapsed microscopy. The controller is used to deliver gas mixture inside any custom
enclosure and miniature incubators.
Connects to a cylinder with compressed pre-mixed
(5%CO2/95%O2 or any other, including nitrogen and low O2) gas.
The output connects directly to a gas port of the incubator or a humidifier.
The controller regulates gas output to provide continuous slow stream of gas mixture, to replace residual gases inside the
incubator, up to 750 SCCM maximum gas flow rate.
Simple to use.
Can be adjusted to fill incubators of different volumes.
Balanced CO2 content inside the incubator controls pH of cell media.
Click on image to enlarge. Note: if using a source of pure CO2, a different CO2-MI controller is required.
Specifications: |
Input: | max
150PSI |
Output: | max
750 SCCM flow rate |
Connectors: |
Push-to-connect:
INPUT for 5/32in. (4mm) O.D. tubing (included);
OUTPUT for 1/8in O.D. tubing (included);
can be replaced with any 10-32 threaded connectors;
includes luer fitting for different size tubing;
includes easy-disconnect coupling for 1/4in. O.D. tubing
|
Indicators: | Digital
display |
Controls: | INPUT PRESSURE
manual regulator;
Digital display |
Dimensions: | 8
x 4 x 9in. |
Power: | 100-240VAC
35W |
Heated humidifier CO2-500ml (Optional accessories)
Required accessories: a source of CO2 gas, miniature incubator.
Optional accessories: a humidifier CO2-500ML,
small volume delivery system,
gas mixture adapter,
pressurized cylinders.
Download PDF manual.
Download PDF catalog.
Click on catalog numbers below to purchase online.
|
|
Bioscience Tools
|
PRICES AND OPTIONS |
PC-MI |
|
Gas Controller for Miniature Incubators.
|
CO2-500ML |
|
Heated Humidifier. When passed through heated water, CO2 mixture becomes humid.
Can be also used as an indicator of gas flow - bubbles will indicated gas
flowing inside the incubator.
Connects inline between the controller and the incubator.
|
|
|
