|
|
|
Miniature Incubator for 90mm dishes, TC-MI-100
Designed for long-term live cell imaging and time-lapsed
microscopy in any dish or chamber up to 90mm diameter. The base
consists of two parts: TC-MWPHB and TC-I-100 insert. Standard multi-well 86x128mm plates will
also fit inside (after removing TC-I-100 insert).
Incorporates heated bottom, luer-lock port for gas mixture (to control CO2 or
hypoxia), heated lid (purchased separately), to prevent condensation, and insert for water
to control humidity (the insert can be also used to position adjustable holders for
electrodes and accessories to position perfusion tubing for continuous media exchange). Built-in multiple ports for
tubing and accessories (probes and sensors).
Fits all brands of motorized stage (see table below).
The bottom is closed (for open bottom incubator, to access with immersion objective -
consider another model). Click on images to enlarge.
Brand |
extension (if required) |
Ludl, Prior, ASI, Marhauser,
Zeiss |
no extension required |
Nikon 236x155mm: |
TC-MI-NIK |
Thorlabs 170x130mm: |
TC-MI-THOR |
Ludl Bioprecision II, 172x116mm: |
TC-MI-LUDL |
Specifications: |
Outside dimensions: | Fits
160x110mm cutout of motorized stages; he base height is
10mm; the bottom is recessed (7mm below the mounting surface, comes with 3mm spacers to
reduce this recessed profile to 5mm; can be leveled by set screws positioned in the corners of the incubator base |
Inside dimensions: | 86x128mm;
34mm from sample to top surface; 24mm (19mm inside
clearance) for low-profile
option; optional spacers to elevate the top surface 9.5mm - to provide more space inside the incubator |
Heated bottom: | 1mm glass |
Stability: | 0.01°C |
Use with: | custom devices and
90mm chambers, standard
multi-well plates, Petri dishes, and coverglasses/slides |
Condensation free lid: | Uses
a built-in temperature sensor to connect independently to
the second channel of temperature controllers, or connect
in parallel with the heated base, 81x121mm optical window |
CO2 port: | Luer-lock connector to a source of gas mixture. |
Media exchange and perfusion: |
Multiple sealed inflow ports, a set of adjustable tubing holders to position inflow and outflow tubing inside sample chambers. |
Click on catalog numbers below to purchase online.
Required accessories: temperature controller.
Optional accessories: CO2/O2 controller, humidifier.
Download PDF manual.
Download PDF catalog.
|
|
Bioscience Tools
ph: 010-6759703, fax: 010-6759703
email: chengyuan@bio-goods.com
|
PRICES AND OPTIONS |
TC-MI-100 |
|
Miniature Incubator for custom devices and chambers, with closed heated bottom.
|
TC-MWPL |
|
Lid for miniature Incubator TC-MWP, MWPHP, MIW, Low Profile
|
TC-I-E |
|
Spacer to elevate the lid 9.5mm
|
TC-MI-THOR |
|
Adapter for ThorLabs stages, 170x130mm
|
TC-MI-NIK |
|
Adapter for Nikon motorized stages, 236x155mm
|
TC-MI-LUDL |
|
Adapter for Ludl Bioprecision II stages, 172x115mm |
MH-MIS |
|
Set of miniature adjustable tubing and sensor holders, x3, includes 4-40 threaded posts
|
|
|