产品名称 50 µm MM (OM4), MTP® (NP) to MTP (P), 216F, with 33/60-inch legs, non-armored EDGE, plenum, pulling grip one end, 100 ft | 216 | Fiber Count | Optical Communications NAFTA B2B Site | Corning
产品货号
产品价格 现货询价,电话:010-67529703
产品规格
产品品牌 corning
产品概述
产品详情
Part # G9375M6QPNCDX100F

EDGE™ MTP® Extender Trunks 50 µm MM (OM4), MTP® (NP) to MTP (P), 216F, with 33/60-inch legs, non-armored EDGE, plenum, pulling grip one end, 100 ft

The EDGE™ MTP® Extender Trunks provide additional distance for the backbone of the EDGE Solution. With a non-pinned MTP on one end of the cable, a pinned MTP on the other and a TIA-568 Type-A polarity, these trunks are designed to interface with a EDGE or Plug & Play™ module and an MTP trunk. All trunks are shipped with strain-relief clips that allow for the tool-less installation in both EDGE and Plug & Play housings. Most often these extender trunks will be used in a Zone Distribution Area (ZDA).

Details
Product Number G9375M6QPNCDX100F
Description EDGE™ Solutions Extender Trunk, 50 µm MM (OM4), MTP® (NP) to MTP (P), 216F, with 33/60-inch legs, non-armored EDGE, plenum, pulling grip one end, 100 ft
Fiber Count 216
Fiber Category 50 µm MM (OM4)
Pulling Grip One Side
Lengths 100 ft
EAN Code 4056418688596

Dimensions
Length 30.5 m   -0 / +0.91m (100.04 ft   -0 / +2.98ft)
Ordering Information
Weight 194.7 kg/km
Standards
RoHS Free of hazardous substances according to RoHS 2011/65/EU
Approvals and Listings NFPA 262, National Electrical Code® (NEC®), OFNP, CSA FT-6
Reaction to fire Cca, s1b, d1, a1
Design
Fiber Count 216
Outer Jacket Color Aqua
Mechanical Characteristics
Nominal Outer Diameter 14 mm (0.55 in)
Design - Connector A
Connector Type MTP® (pinned)
Ferrule Material Composite
Design - Connector B
Connector Type MTP® (non-pinned)
Ferrule Material Composite
Furcation - Connector A
Leg Color Aqua
Leg Diameter 2 mm (0.08 in)
Leg Length 1,524 mm   -0 / +76mm (60 in   -0 / +2.99in)
Furcation - Connector B
Leg Color Aqua
Leg Diameter 2 mm (0.08 in)
Leg Length 838 mm   -0 / +76mm (32.99 in   -0 / +2.99in)
General Specifications
Application Data Center LAN/SAN 
General Specifications
Flame Rating Plenum (OFNP)
Cable Assembly Type EDGE™ Extender Trunk
Cable Type Indoor: ANSI/ICEA S-83-596
Optical Specifications - Connector A
Insertion Loss, Max. 0.35 dB
Reflectance, Typical < -20 dB
Optical Specifications - Connector B
Insertion Loss, Max. 0.35 dB
Reflectance, Typical < -20 dB
Pulling Grip - Connector A
Pulling Grip Yes
Tensile Strength 440 N
Min. Duct Size Diameter 50 mm (1.97 in)
Pulling Grip - Connector B
Pulling Grip No
Environmental Conditions
Temperature Range, Operation -10 °C - 60 °C (14 °F - 140 °F)
Optical Characteristics
Fiber Compliance IEC 60793-2-10 for A1a class 50/125 multimode fibers; TIA/EIA 492AAAD (OM4); ITU-T Recommendation G.651; ISO/IEC 11801 Ed.2.2 Grade OM4
Optical Characteristics
Fiber Code Q
Fiber Type Multimode
Fiber Compliance IEC 60793-2-10 for A1a class 50/125 multimode fibers; TIA/EIA 492AAAD (OM4); ITU-T Recommendation G.651; ISO/IEC 11801 Ed.2.2 Grade OM4
Fiber Core Diameter 50 µm
Minimum Effective Modal Bandwidth (EMB) 4700 MHz*km / -
Maximum Attenuation 2.8 dB/km / 1.0 dB/km
Min. Overfilled Launch (OFL) Bandwidth 1500 MHz*km / 500 MHz*km
Serial 1 Gigabit Ethernet 1000 MHz*km / 550 MHz*km
Parallel Optics 40 Gigabit Ethernet 150 m / -
Serial 10 Gigabit Ethernet 550 MHz*km / -
Wavelengths 850 nm / 1300 nm
Fiber Category OM4
Standards
Fiber Standards TIA/EIA-492AAAC-A ,  Tested with minEMBc method to TIA/EIA-455-220 ,  IEC 60793-2-10 Type A1a.2 Ed.2.0 ,  IEC 60793-1-49 Ed.2.0 ,  ITU-T G.651 ,  ISO/IEC 11801 Ed.2.2 Cat. OM3 
Technical Documents
How To Buy

Enterprise Networks and Distributors

Enterprise networks are owned by a single organization or entity for the exclusive use of the organization’s members. For example, universities, businesses, medical campuses, etc.

We work with authorized distributors who support our enterprise networks strategy. Our dedicated distributors have robust programs to support end users, contractors and installers and are ready to support your needs. Program support includes training, customer needs assessment, project planning, design, logistics and equipment. Their teams of sales and technical support resources are ready to support your Enterprise-driven opportunities. Call them today!

+1 800-743-2671
Enterprise Networks and Distributors

Carrier Networks and Distributors

Carrier networks are owned by communications providers that sell phone, video and/or data services. For example, networks owned by telecommunications companies, CATV companies, municipalities, etc.

Our authorized distributors are trained on all facets of our product line and they are ready to assist you. Our distributors stock our product, and can support planning, design, logistics and equipment staging for you as needed. Their teams of sales and technical support resources can be a valuable addition to your service offering.

+1 800-743-2671
产品资料