产品名称 50 µm multimode (OM4), MTP (non-pinned) to MTP (non-pinned), 72 F, 24-in legs on both ends, pulling grip one side, 100 ft | 72 | Fiber Count | Optical Communications NAFTA B2B Site | Corning
产品货号
产品价格 现货询价,电话:010-67529703
产品规格
产品品牌 corning
产品概述
产品详情
Part # A757572QADAAC100F

Plug & Play™ Classic MTP® Trunk 50 µm multimode (OM4), MTP (non-pinned) to MTP (non-pinned), 72 F, 24-in legs on both ends, pulling grip one side, 100 ft

Plug & Play™ Classic Systems MTP® Trunks provide the backbone of the Plug & Play System. With non-pinned MTPs on both ends of the cable, these trunks are designed to interface with the Plug & Play Universal modules. All trunks are shipped with strain-relief clips that allow for the tool-less installation into both EDGE® and Plug & Play housings. These trunks conform to TIA-568 Type-C polarity.

Details
Product Number A757572QADAAC100F
Description Plug & Play™ Classic Low-Loss MTP® Armored Trunk, 50 µm Multimode (OM4), MTP (non-pinned) to MTP (non-pinned), 72 F, 24-in legs on both ends, pulling grip one side, 100 ft
Fiber Count 72
Fiber Category 50 µm MM (OM4)
Outer Jacket Color Aqua
EAN Code 4056418647784

Dimensions
Length 30 m   -0 / +2.9m (98.4 ft   -0 / +9.51ft)
Ordering Information
Weight 35 kg
Weight 273 kg/km
Standards
RoHS Free of hazardous substances according to RoHS 2011/65/EU
Flame Test Method NFPA 262 (for plenum, riser and general building applications)
Design
Fiber Count 72
Outer Jacket Color Aqua
Polarity Universal, TIA-568 Type-C
Mechanical Characteristics
Nominal Outer Diameter 19.9 mm   ± 1.5mm (0.78 in   ± 0.06in)
Min. Bend Radius Installation 199 mm (7.83 in)
Mechanical Characteristics
Max. Tensile Strength for Installation 660 N
Design - Connector A
Connector Type MTP® (non-pinned)
Ferrule Material Composite
Design - Connector B
Connector Type MTP® (non-pinned)
Ferrule Material Composite
Furcation - Connector A
Furcation Type Size 2
Leg Color Aqua
Leg Diameter 2 mm (0.08 in)
Leg Length 610 mm   -0 / +76mm (24.02 in   -0 / +2.99in)
Furcation - Connector B
Furcation Type Size 2
Leg Color Aqua
Leg Diameter 2 mm (0.08 in)
Leg Length 610 mm   -0 / +76mm (24.02 in   -0 / +2.99in)
General Specifications
Application Data Center LAN/SAN 
General Specifications
Cable Assembly Type Plug & Play™ Trunk
Optical Specifications - Connector A
Insertion Loss, Max. 0.35 dB
Reflectance, Typical < -20 dB
Optical Specifications - Connector B
Insertion Loss, Max. 0.35 dB
Reflectance, Typical < -20 dB
Pulling Grip - Connector A
Pulling Grip Yes
Tensile Strength 440 N
Min. Duct Size Diameter 57 mm (2.24 in)
Pulling Grip - Connector B
Pulling Grip No
Environmental Conditions
Temperature Range, Operation -10 °C - 60 °C (14 °F - 140 °F)
Optical Characteristics
Fiber Compliance IEC 60793-2-10 for A1a class 50/125 multimode fibers; TIA/EIA 492AAAD (OM4); ITU-T Recommendation G.651; ISO/IEC 11801 Ed.2.2 Grade OM4
Optical Characteristics
Fiber Code Q
Fiber Type Multimode
Fiber Compliance IEC 60793-2-10 for A1a class 50/125 multimode fibers; TIA/EIA 492AAAD (OM4); ITU-T Recommendation G.651; ISO/IEC 11801 Ed.2.2 Grade OM4
Fiber Core Diameter 50 µm
Minimum Effective Modal Bandwidth (EMB) 4700 MHz*km / -
Maximum Attenuation 2.8 dB/km / 1.0 dB/km
Min. Overfilled Launch (OFL) Bandwidth 1500 MHz*km / 500 MHz*km
Serial 1 Gigabit Ethernet 1000 MHz*km / 550 MHz*km
Parallel Optics 40 Gigabit Ethernet 150 m / -
Serial 10 Gigabit Ethernet 550 MHz*km / -
Wavelengths 850 nm / 1300 nm
Fiber Category OM4
Standards
Fiber Standards TIA/EIA-492AAAC-A ,  Tested with minEMBc method to TIA/EIA-455-220 ,  IEC 60793-2-10 Type A1a.2 Ed.2.0 ,  IEC 60793-1-49 Ed.2.0 ,  ITU-T G.651 ,  ISO/IEC 11801 Ed.2.2 Cat. OM3 
Technical Documents
Features & Benefits
Factory-terminated solutions
Provide consistent quality, ensure system performance, and reduce installation time
Low insertion loss performance
Allows for more connections in a link when deploying a TIA-942-compliant system
Corning®ClearCurve®50 μm optical fiber
Offers enhanced bend performance, allowing tighter cable routing without negatively impacting system performance
100G ready performance
Ensures product will meet the requirements of 100G Ethernet applications
Maximum skew of 0.75 ns
Product is assured to work in parallel optic applications for Ethernet, Fiber Channel and InfiniBand
How To Buy

Enterprise Networks and Distributors

Enterprise networks are owned by a single organization or entity for the exclusive use of the organization’s members. For example, universities, businesses, medical campuses, etc.

We work with authorized distributors who support our enterprise networks strategy. Our dedicated distributors have robust programs to support end users, contractors and installers and are ready to support your needs. Program support includes training, customer needs assessment, project planning, design, logistics and equipment. Their teams of sales and technical support resources are ready to support your Enterprise-driven opportunities. Call them today!

+1 800-743-2671
Enterprise Networks and Distributors

Carrier Networks and Distributors

Carrier networks are owned by communications providers that sell phone, video and/or data services. For example, networks owned by telecommunications companies, CATV companies, municipalities, etc.

Our authorized distributors are trained on all facets of our product line and they are ready to assist you. Our distributors stock our product, and can support planning, design, logistics and equipment staging for you as needed. Their teams of sales and technical support resources can be a valuable addition to your service offering.

+1 800-743-2671
产品资料