联系方式：400-650-8506
CNEN
产品名称 50 µm multimode (OM3), 8F MTP (pinned) Connector to 8F MTP (pinned) Connector, 8F, with 33 in legs, tool-less pulling grip one side, 100 ft | 50 µm MM (OM3) | Fiber Category | Optical Communications NAFTA B2B Site | Corning
产品货号
产品价格 现货询价，电话：010-67529703
产品规格
产品品牌 corning
产品概述
产品详情
50 µm multimode (OM3), 8F MTP (pinned) Connector to 8F MTP (pinned) Connector, 8F, with 33 in legs, tool-less pulling grip one side, 100 ft
Part # GE5E508TPNDDU100F

EDGE8™ MTP® Trunk Cable 50 µm multimode (OM3), 8F MTP (pinned) Connector to 8F MTP (pinned) Connector, 8F, with 33 in legs, tool-less pulling grip one side, 100 ft

Typically ships in 24 day(s) Actual lead time confirmed upon receipt of order.
E-mail
Product Information

EDGE8™ trunks utilize an 8-fiber push/pull optical connector that is pinned on both ends of the cable. The trunks are shipped with strain-relief clips that allow for tool-less installation in EDGE8 housings. The grip can be pulled using up to 100 lbs of pulling tension while providing complete protection for the connectors. All trunks greater than 75 ft are packaged on a plastic corrugated reel for easy installation.

Details
Product Number GE5E508TPNDDU100F
Description EDGE8™ MTP® Trunk Cable, 50 µm multimode (OM3), 8F MTP Connector to 8F MTP Connector, 8F, with 33 in legs, tool-less pulling grip one side, 100 ft
Fiber Category 50 µm MM (OM3)
Fiber Count 8
Armored No
EAN Code 4056418688763

Specifications
Dimensions
Length 30 m (98.4 ft)
Ordering Information
Packing Type Plastic reel
Packing contents 2x EDGE™ clip size 1 single stack, 1x EDGE clip size 1 double stack, test reports are online
Standards
RoHS Free of hazardous substances according to RoHS 2011/65/EU
Approvals and Listings NFPA 262, National Electrical Code® (NEC®), OFNP, CSA FT-6
Reaction to fire Cca, s1b, d1, a1
Design
Fiber Count 8
Outer Jacket Color Aqua
Polarity Universal, TIA-568 Type-B
Mechanical Characteristics
Nominal Outer Diameter 5 mm   ± 0.3mm (0.2 in   ± 0.01in)
Design - Connector A
Connector Type MTP® (pinned)
Boot Color Black
Ferrule Material Composite
Design - Connector B
Connector Type MTP® (pinned)
Boot Color Black
Ferrule Material Composite
Furcation - Connector A
Furcation Type EDGE™ Size 1, 14.7 mm x 14.7 mm x 108.6 mm
Leg Color Aqua
Leg Diameter 2 mm (0.08 in)
Leg Count 1
Plug Height 14.7 mm (0.58 in)
Plug Width 14.7 mm (0.58 in)
Plug Depth 108.6 mm (4.28 in)
Leg Length 840 mm   -0 / +76mm (33.07 in   -0 / +2.99in)
Furcation - Connector B
Furcation Type EDGE™ Size 1, 14.7 mm x 14.7 mm x 108.6 mm
Leg Color Aqua
Leg Diameter 2 mm (0.08 in)
Leg Count 1
Leg Length 840 mm   -0 / +76mm (33.07 in   -0 / +2.99in)
General Specifications
Application Data Center LAN/SAN 
General Specifications
Flame Rating Plenum (OFNP)
Cable Assembly Type EDGE8™ Trunk
Cable Type Indoor: ANSI/ICEA S-83-596
Optical Specifications - Connector A
Insertion Loss, Max. 0.25 dB
Reflectance < -20 dB
Optical Specifications - Connector B
Insertion Loss, Max. 0.25 dB
Reflectance < -20 dB
Pulling Grip - Connector A
Pulling Grip Yes
Tensile Strength 440 N
Min. Duct Size Diameter 64 mm (2.52 in)
Pulling Grip - Connector B
Pulling Grip No
Environmental Conditions
Temperature Range, Operation -10 °C - 60 °C (14 °F - 140 °F)
Optical Characteristics
Fiber Code T
Fiber Type Multimode
Performance Option Code 80
Fiber Core Diameter 50 µm
Minimum Effective Modal Bandwidth (EMB) 2000 MHz*km / -
Maximum Attenuation 2.8 dB/km / 1.0 dB/km
Min. Overfilled Launch (OFL) Bandwidth 1500 MHz*km / 500 MHz*km
Serial 1 Gigabit Ethernet 1000 MHz*km / 600 MHz*km
Serial 10 Gigabit Ethernet 300 MHz*km / -
Wavelengths 850 nm / 1300 nm
Fiber Category OM3
Technical Documents
Technical Documents
Feature/Benefits
Features & Benefits
8-fiber array connectors
Base 8 configuration allows for seamless migration to data rates of 40G and above
Pinned MTP's on both ends
Allows for a single pinless jumper deployment in parallel optic electronics deployments
Small outer diameter
Improves the cable tray fill ratio and allows for improved airflow
Bend-improved fiber
Allows tighter cable bends for slack storage and routing, less risk of downtime due to pinched or bent cables
Factory-terminated solutions
Provide consistent quality, ensure system performance, and reduce installation time
Find a Distributor
How To Buy

Enterprise Networks and Distributors

Enterprise networks are owned by a single organization or entity for the exclusive use of the organization’s members. For example, universities, businesses, medical campuses, etc.

We work with authorized distributors who support our enterprise networks strategy. Our dedicated distributors have robust programs to support end users, contractors and installers and are ready to support your needs. Program support includes training, customer needs assessment, project planning, design, logistics and equipment. Their teams of sales and technical support resources are ready to support your Enterprise-driven opportunities. Call them today!

+1 800-743-2671
Enterprise Networks and Distributors

Carrier Networks and Distributors

Carrier networks are owned by communications providers that sell phone, video and/or data services. For example, networks owned by telecommunications companies, CATV companies, municipalities, etc.

Our authorized distributors are trained on all facets of our product line and they are ready to assist you. Our distributors stock our product, and can support planning, design, logistics and equipment staging for you as needed. Their teams of sales and technical support resources can be a valuable addition to your service offering.

+1 800-743-2671
Carrier Networks and Distributors
产品资料