世联博研公司现货供应Abq Industrial品牌订货号为的Mark-10 WTT Wire Terminal Tester

The WTT has been replaced by the new and improved WT3-201

Wire Terminal Tester Pull Tester

Range: 0-110 lbs / 0-50 Kg / 0-500N

Measures Peak Pull Force required to remove wire terminal

Two Models Available
WTT-110B, 0-50 Kg / 0-110lbs / 0-500 N
WTT-220X, 0-100Kg /0-220lbs / 0-1000N

The WTT Series of Wire Terminal Testers accurately measures the pull-off force off crimped-on wire terminals. The pull tester is an easy to use all-in-one, single-range solution for a wide range terminal testing applications, eliminating the need to purchase any additional grips, fixtures or accessories.

Suitable for wires AWG 30 to AWG 8 (diameters from 0.010" to 0.130").

WTT-220X version includes USB Output and is supplied with data transfer cable and software allowing the user to transfer peak values to a PC for data reporting. Additional software features include user-set limit for audible alarm as limit is exceeded.

WTTM-220X Software is compatible with Windows XP and Windows 7, it is not compatible with Windows 8. It also Requires Microsoft Excel

line
Photo Gallery
line

line
Features
line

Display force values in peak or real-time measuring mode
Test for UL 486 & Mil Spec and other standards
Fabricated from steel and stainless steel, machined to the highest tolerances
Includes Traceable Calibration Certificate

line Force Ranges line

Press START key to turn on your WTT-110B/220X Wire Terminal Tester
Press UNITS key to select desired measuring units LB / N / KG
Press PEAK key to select peak or real-time measuring mode
Insert wire sample into the appropriate size wire terminal slot
Open lever-clamp assembly and insert tail end of wire
Press START key to zero display and enter “live” measuring mode
Pull lever to apply force to wire and perform wire terminal pull out force measurement
The “live” measurement mode will time out 5 seconds after pressure is released
Repeat from step 4 for continued testing

line Dimensions line

Remove the lever by unscrewing it in a counter-clockwise direction and move the Wire Clamp assembly out from the path of the hanging sample.
Position the WTT-110B/220X in a vertical position at the edge of a strong bench or desk. Be sure to secure it with strong clamps so it can not topple over when the weight is attached.
Turn on tester and set the display to track mode.
Press START to activate measurement mode (it times out in 5 seconds if load is not sensed)
Using a heavy-duty monofilament (fishing line), wire or similar, suspend a known weight from one of the teeth on the wire terminal fixture by hooking a loop of the material over the selected tooth.

line Specifications line

Measuring Range	WTT-110B: 0-50 Kg / 0-110 lbs / 0-500N WTT-220X: 0-100 Kg / 0-220 lbs / 0-1000N
Resolution	0.01 Kg / 0.1 lbs / 0.1 N
Terminal Adapter Slot width (mm)	0.5, 0.8, 1.0, 1.4, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 5.0, 6.0
Accuracy	±0.5% F.S. or better
Operating Mode	Continuous: Displays actual value in Kg, lbs pr N Peak-Hold: Displays peak value in Kg, lbs pr N
Wire Diameter	SAE AS7928 II: AWG 8...30 IEC 60352-2: Cross section 0.05...10mm² Maximum: 0.236" (6mm)
Overload	200% Full Scale (LCD indicator at 120%)
Display	LCD, 4-1/2 digit, 12mm high
Memory	Peak Value
Power Supply	Internal Solar Cell, external power is not required
Temp. Range	Operating: 32 to 104° F (0 to 40° C) Storage: -4 to 140° F (-20 to 60° C)
Weight	30.8 lbs (14 Kg) (Shipping weight 37lbs)
Dimensions	14.2" x 6.3" 2.6" (360 x 160 65mm)
Material	Anodized aluminum, steel and stainless steel
Warranty	1 Year