Price:
Cedar NTS-6 Motorized Rotating Torque Analyzer
9 Ranges up to 45.00 lb-in
NTS-6 is a motorized rotating torque tester that measures rotating dynamic torque while turning the sample. Check the rotating torque, smoothness of rotation and components of small precision motors, such as, gearbox, bearings, oil seals, etc. Torque data can be continuously output via RS-232 enabling you to display a torque profile using data acquisition software.
Features
- Peak, Real Time and Continuous Output measuring modes (selectable)
- Programmable high/low setpoints for Go/No go testing
- RS-232C output in Both CW and CCW operation
Force Ranges
| Model | Capacity | | NTS-6-S1 | 0.030 - 0.900 lb-in | | NTS-6-S2 | 0.030 - 1.740 lb-in | | NTS-6-S5 | 0.30 - 4.50 lb-in | | NTS-6-S10 | 0.30 - 9.00 lb-in | | NTS-S20 | 0.30 - 17.40 lb-in | | NTS-S50 | 0.30 - 45.00 lb-in | | NTS-S1oz | 0.30 - 14.00 oz-in | | NTS-S2oz | 0.30 - 28.00 oz-in | | NTS-S5oz | 3.00 - 70.00 oz-in |
The available engineering units of measurement on the NTS-6 Rotating Torque Testers are oz-in, lb-in, N-m, N-cm and Kgf-cm.
Specifications
| Accuracy | ±1% F.S., 1LSD | Measuring Range
(at the time of Track) | S1/oz: 3.0~100mNm
S2/oz: 3.0~200mNm
S5/oz: 0.030~0.5Nm | Max. Rotational
Speed
(no-load) | S1/oz: 85 rpm
S2/oz: 30 rpm
S5/oz: 13 rpm
S10: 18 rpm
S20: 18 rpm
S50: 5 rpm | | Display | 4 digit LCD display | | Operation | Both CW and CCW motorized rotation | | Measuring modes | PP: Peak Mode displays PEAK torque value that will not change until a higher value is measured.
GO: Real Time Mode displays TRANSIENT torque values.
RG: Output Torque Data every 1/100 seconds. | | Measurement start time | Can be set up to 1 second in 0.1 second increments. | | Measuring time | Time can be programmed between 1 and 20 seconds. | | Go/No go testing | Programmable High and Low values; Green lamp (OK solid, NG blinking). | | External input/output | Signal output (open collector): Go and No Go
Data output: RS-232C (9600 baud) External start switch input | | Data memory | 400 data | | Power supply | AC100V~240V | | Bit size | 4mm diameter |
Buy Now |
|
