For use with the Taber Shear / Scratch Tester
| Part No |
Model |
Description |
| 121006 |
139-55 |
Conical Diamond Tool with 90° 3 mil (0.003″) radius point |
| 121006-1 |
139-56 |
| Conical Diamond Tool with 90° 3.5 mil (0.0035″) radius point |
|
| 121008 |
139-58 |
Diamond Scratch Tool (cutting edge is the converging point from three sides and edges of a perfect cube) |
| 132796 |
|
Scratch Tip 1.0 mm diameter hemisphere (each) [requires scale beam height extension kit] |
| 121017 |
S-20 |
Contour Shear Tool, Tungston Carbide |
| 133582 |
S-20-3 |
Carbide Tool – similar to S-20 Contour Shear Tool but with no radius (meets Honda requirements) |
| 132914 |
S-20-4 |
Carbide Tool – similar to S-20 Contour Shear Tool (meets Toyota requirements) |
| 134306 |
|
Shear / Scratch Tester Scale Beam Calibration Verification Fixture |
| 132618 |
|
Diamond Standardisation Plates – PMMA vacuum pre-dried and sealed (pkg 2) |
| 132719 |
|
Scale Beam Height Extension Kit for Model 550/551 – for testing specimens up to 40 mm [includes scale beam adaptor, stud extension and nut, set of 2 shim plates] |
| 132678 |
|
Scale Beam Height Extension Kit for Model 502/502 -ISO – for testing specimens up to 40 mm [includes scale beam adaptor, stud extension and nut, set of 3 shim plates] |
| 133659 |
|
Scale Beam Fixed Weight (provides 15N load) |
| 134247 |
|
Scale Beam Modified Weight Set (converts scale to 0 – 50 gram range) |
| 103300 |
139-61 |
Measuring Magnifier 7x |
| 131763 |
|
Measuring Magnifier 10x |
| 112954 |
|
Step Down Transformer (220/110V) |
| 131764 |
|
Operating Instructions – Shear Scratch Tester Model 550/551 (English) |
| 134279 |
|
Operating Instructions – Shear Scratch Tester Model 550/551 (Spanish) [available only as a pdf] |
Placing an order and Payment Options:
If you have a trading account with Tendring pacific
We will supply the goods on receipt of a written Purchase Order and according to the trading terms agreed. All orders are subject to
our Standard Terms & Conditions of Sale in particular we draw your attention to clause 3.1 – small order administration charge.
If you do not have a trading account with Tendring pacific
- Tendring pacific offer open account facilities on agreed terms based upon the reports supplied by an independent credit rating agency. Payment terms need to be agreed in writing by a senior officer of the client company before any open account transaction can be undertaken.
- Payment can also be made by Proforma Invoice for one off transactions or for urgent orders if open account terms are pending agreement.
- We accept both credit and debit cards – Visa, Mastercard, Maestro, JCB and Visa Electron
Card Charges
- For transactions below £250.00 (GBP) Tendring pacific waives the standard additional card charge of 2%
- For transactions of £250.00 (GBP) and above, Tendring pacific adds a standard additional card charge of 2%
Please contact our sale team on 01223 492081 or sales@tendringpacific.com
