产品名称 Dial Micrometers (49-37/38/39) « Tendring pacific
产品货号
产品价格 现货询价,电话:010-67529703
产品规格
产品品牌 tendring pacific
产品概述 A rage of micrometers for the convenient and accurate measurement of thickness.
产品详情

A rage of micrometers for the convenient and accurate measurement of thickness.

Dial Micrometers (49-37/38/39)

These micrometers are used for convenient, accurate thickness measurements.

Applications: Paper, film, foil, textiles, non-wovens, plastic

DW Model 49-39-01 – Analog/Dial Bench Micrometers    
This instrument eliminates the minute errors caused in any instrument when measuring at varying thicknesses. The lever activated upper anvil descends by gravity (dead weight) and will have uniform surface pressure at any given point of travel, from .0005″ to a full ½” thickness. The DW Model can also be supplied with a delayed action mechanism to reduce the speed at which the upper anvil descends.
Standard Features Include:
• 5/8″ anvils
• Range: 0 – ½”
• 5.8+ psi
• Accuracy: +.0002″ – .0003″
and/or +.00508 mm – .00762 mm
Available Throat Depths:
• 4″ (shown),
• 7″ , 12″, 18″
Available Dial Graduations:
• Dial A (.001″)
• Dial B (.0005″)
• Dial M (.01 mm)
• Dial MA (.001″ & .01 mm)
M Model 49-38-01 – Analog/Dial Bench Micrometers    
This is a basic, in-plant guage for use at the desk or laboratory. The precision ground anvils are lever activated for ease of operation. Anvil operation is by spring action and the 7 to 9 lbs. psi meets the TAPPI standard.
Standard Features Include:
• 5/8″ anvils
• Range: 0 – 5/16″
• 7 – 9 p.s.i.
• Accuracy: +.0002″ – .0003″
and/or +.00508 mm – .00762 mm
Available Throat Depths:
• 4″ (shown)
• 12″
• 18″
Available Dial Graduations:
• Dial A (.001″)
• Dial B (.0005″)
• Dial M (.01 mm)
• Dial MA (.001″ and .01 mm)
2 1/2″ Throat Model 49-37-02 – Portable Hand Held Micrometer    
Ultra precision plus portability make the 2½” Throat Model a valuable companion for the “person-on-the-go”. Designed with the same features of our larger instruments, this unit weighs only 24 ounces with an overall size of 4 3/4″x 6″. Its diecast housing contains a molded handle shaped for comfort and ease of handling. This unit meets TAPPI standards.
Standard Features Include:
• 5/8″ anvils
• Range: 0 – 5/16″
• 7 – 9 psi
Available Throat Depths:
• 2½”
Available Dial Graduations:
• Dial HA (.001″)
• Dial HM (.01 mm)

For more information,

产品资料